Monitor Audio BRONZE W10 Subwoofer
- 100% brand new original products
- Official manufacturer’s warranty valid in India
- Price includes GST & Shipping
- Check for EMI & Pay on Delivery Options
Country of Origin: United Kingdom
Color: Urban Grey/White/Black/Walnut
Warranty: 1 Years
Description
Monitor Audio BRONZE W10 SubwooferIf you have an irrevocable inclination towards deep and refined bass notes, the Monitor Audio Bronze W10 should be an absolutely must-have addition to your speaker set-up as every soundscape is effortlessly reinforced by Monitor’s aesthetically crafted subwoofer.
Packs More Punch and Precision
The Monitor Audio Bronze W10’s long-throw 10″ C-CAM subwoofer driver combines with the 10″ auxiliary bass radiator to enhance a sense of remarkable realism to any performance. Monitor Audio’s engineers have acoustically improved the driver and bass radiator by attenuating the moving masses and tuning the compliances in the system to level up the transient response – kick drums and blasts now have much more punch and precision. Reduced moving mass and improved rubber feet enables a direct transmission of more energy into the room rather than being lost through mechanical vibrations through the floor and walls.
Key Features
- Audiophile-grade subwoofer from Monitor Audio
- Long-throw 10" (250 mm) driver featuring ‘dished’ C-CAM
- 10" (250 mm) flat panel Auxiliary Bass Radiator (ABR) positioned underneath the unit
- Class D amplifier with high current Switch Mode Power Supply (SMPSU)
Technical Specs
Technical details | |
---|---|
System Format | Long-throw 10" driver featuring ‘dished’ C-CAM cone. 10" flat panel ABR (Auxiliary Bass Radiator). 18 mm M.D.F. internally braced construction |
Lower Frequency Limit | -3 dB @ 33 Hz / -10 dB @ 28 Hz (Free Field) Default preset: Music, -3 dB @ 29 Hz / -10 dB @ 25 Hz (In Room) |
Upper Frequency Limit | -6 dB @ 150 Hz |
Drive Unit Complement | 1 x 250 mm (10") C-CAM subwoofer driver featuring a 2" long throw voice coil |
Linear Driver Excursion | 17 mm peak to peak |
Amplifier Output | 220 W |
Amplifier Classification | Class D with high current Switch mode power supply (SMPSU) |
Phase Control | 0 Degrees & 180 Degree pure Invert |
Low Pass Filter Alignment | 4th order (24 dB/Octave), from 50 Hz to 120 Hz |
Equalisation DSP | 3 pre-set modes: Music, Movie, Impact |
Auto Sensing | Line Level >3mV. Auto Standby feature after 20 mins |
Audio Input/Outputs | LFE unbalanced input RCA Stereo unbalanced inputs RCA |
Input Impedance | 20 kOhms input impedance |
12 V Trigger | 3.5 mm mono mini-jack. 6 V threshold |
Electrical Certifications | CE / CB / ETL / Fcc / CCC / ErP (Energy saving compliant) |
Mains Input Voltage | 110 – 120 Vac 50 – 60 Hz / 220 – 240 Vac 50 – 60 Hz (Manually selected) |
Power Consumption | Maximum 300 W, Standby <0.5 W (ErP compliance) |
Fuse Type | 20 mm T4AL 250 VAC |
External Dimensions (Including Amp, Drivers and Terminals (H x W x D)) | 321 x 321 x 364 mm (125/8 x 125/8 x 145/16") |
External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D)) | 366.5 x 321 x 364 mm (147/16 x 125/8 x 145/16") |
Weight (unpacked) | 13.4 kg (29 lb 9 oz) |
Sold As | Single Unit |
Monitor Audio
There are no question found.
Setup
Setting up your system is fairly simple. You can follow the instructions in the video below or navigate through the product manual available at the bottom of this page. If you still face issues, feel free to connect with our expert team on chat or call.
Rating & Review
There are no reviews yet.