Bowers & Wilkins CDA-2HD DSP Amplifier
- 100% brand new original products
- Official manufacturer’s warranty valid in India
- Price includes GST & Shipping
- Check for EMI & Pay on Delivery Options
Country of Origin: China
Color: Black
Warranty: 1 Year
Description
The Bowers & Wilkins CDA-2HD is a high power distribution amplifier, designed to drive current and future Bowers & Wilkins Custom Installation loudspeakers. Embedded DSP allows optimisation of a wide range of products and dynamic EQ for Bowers & Wilkins subwoofers. It boasts two channels of 500 watts each, and its half-rack width 2U design delivers high-performance from minimum rack space.
Impressively Smart
To ensure the Bowers & Wilkins CDA-2HD delivers in the modern custom installation system, it is equipped with Digital Signal Processing (DSP). This allows it to be used in wide variety of situations, provides control over IP and configuration, and dynamic EQ for Bowers & Wilkins subwoofers.
Compact Powerhouse
CDA-2HD’s half rack width 2U size means that it takes up the minimum of rack real estate. But with two channel of 500 watts of Class D amplification on board it can bring the power required. Plus, as it’s bridgeable this can be configured to deliver 1,000 watts where needed.
Flexible
Whether you are looking to upgrade an in-situ installation or planning a new one, the CDA-2HD DSP amplifier is a great solution. It combines power with finesse, and works with a wide variety of Bowers & Wilkins products, both current and future.
Key Features
- 500 W x 2 channels Distribution power amplifier from B&W
- Compact 2U Design
- Mighty Flexible
Technical Specs
Â
| Technical Details | |
|---|---|
| Load impedance range |  >3Ω per channel (>6Ω in bridge mode) Output Power perchannel, non-clipped: >50W into 8Ω >100W into 4Ω Output Power bridge mode,non-clipped: >1000W into 8Ω Output Power total,all channels: >1000W short term >250W continuous average |
| DC offset voltage | <50mV |
| Frequency Response (-3dB) | <10Hz to >30kHz, any load impedance |
| Frequency response accuracy | 20Hz-20kHz: ±1dB |
| Signal to Noise ratio (Ref. 50W/8Ω) | >85dB A-Weighted |
| THD+N (1kHz, 12.5W, 4Ω) | Less than 1% |
| Voltage Gain | 21dB to 45dB, adjustable |
| Input impedance | 10KΩ |
| Maximum input voltage | 4 Vrms |
| Signal sense threshold | 2.5mV (independent of Gain setting) |
| Wake-up time | <0.2s (If other zones active): <2s (From all zones inactive) |
| Turn-off time | 15 minutes from last signal detected |
| 12V trigger input threshold | typically 3V (recommended input is 5-15V) |
| Controls & Indicators Front panel |
1 x Power LED (unit active – White, Fault – Red) 1 x Network status LEDs (Network present – White, Fault – Red) 1 x Zone status LEDs (Signal present – White, Fault – Red) |
| Rear panel: | 1 x Reset Panel |
| Connectors | Input: 1 x RCA (pair) Phono socket, Analogue line in 1 x RCA Phono socket, Digital line in 1 x EthernetOutput: 1 x SpeakOn 1 x 3.5mm jack - 12V trigger IN 1 x 3.5mm jack - 12V trigger OUT (Max 100mA pass-through) |
| Power | Power Consumption:Â <0.5W Standby, WoL disabled
<2W Standby, WoL enabled
200W maximum average
2,800W peakAC Supply: 100-240V 50/60Hz AC inlet: IEC C14, switched |
| Dimensions | Height: 85mm (3.4") 1U (100mm (3.9") plus feet) Width: 218mm (8.6") Depth: 315mm (12.4") Net Weight: 3.4kgs (7.5lb) Finish: Black |
Bowers & Wilkins
There are no question found.
Setup
Setting up your system is fairly simple. You can follow the instructions in the video below or navigate through the product manual available at the bottom of this page. If you still face issues, feel free to connect with our expert team on chat or call.
Rating & Review
There are no reviews yet.